Page Title: Guidon Poles

Guidon staff sets

Each set includes silver metal army spear, chrome plated brass screw joint and chrome plated pointed bottom ferrule. Natural oak finish wood staff.

Click for Gold, Brass Plated Hardware

 

This metal piece of hardware is called a "pointed bottom ferrule". It is chrome plated and comes pre mounted.

This metal piece of hardware is the chrome plated brass screw joint. Both halves of the screw joint are pre mounted. Just screw the two halves together

This is the chrome army spear. It is chrome plated. The top of the pole is pre tapered to accept the army spear. For shipping purposes, the spear is shipped detached. You will need to drill a small hole into the top of the pole and mount the spear using the screw provided.

 

 

A complete set includes the two piece pole, chrome bottom ferrule, chrome army spear

Guidon pole sets with CHROME plated hardware

Model Approx length tip to tip when assembled Diameter # Sections Price
GPS7 8' 1 1/4" 2 $279.00
GPS8 9' 1 1/4" 2 $299.00
GPS9 10' 1 1/4" 2 $316.00

Due to UPS oversize carton requirements, add $22.00 per order, not $22.00 per pole, for orders that include any of these poles.

Chrome Guidon Pole Floor Stand With Adapter

#FS6 $428.00

When only the best will do. Stunning chrome plated cast iron floor stand made using a high quality sand casting process with fewer impurities in the metal. The entire floor stand is chrome plated, the center is highly polished to a mirror finished

This guidon pole stand comes complete with our injection molded tapered nylon guidon pole bottom ferrule adapter. The price includes the adapter - no need to order the adapter as a separate item. You cannot order these stands without the adapter but you can remove the adapter. If you choose to do this, these stands will accommodate an 1-1/4" outside diameter pole.

THIS FLOOR STAND AND ADAPTER WILL FIT OUR GUIDION STAFF. IT MAY NOT FIT YOURS. It is made to fit our guidon staffs. It is not made to fit every guidion staff

 

   

Guidon Pole Bottom Ferrule Adapter by itself

This white cylinder is injection molded and tapered inside to accept the pointed bottom ferrule of our guidon pole staff so that it will fit in our floor stands shown. The adaptor will not fit every floor stand we sell, it will fit only the three we show on this page.

#GPAD $33.00

Floor stands, guidon pole bottom adapters and guidon  pole staffs are sold separately.

This adapter will fit our guidon staffs and our three floor stands shown on this page. It may or not work with guidon staffs and stands you got elsewhere. I suggest you NOT buy it to fit poles you got elsewhere unless you get a single adapter first before buying multiples

 

 

 

Classic Beauty Flag Floor Stand  #FS3 $109.00

Accepts a 1.25" pole but it will accept the pointed end of our guidon pole staff if you use the guidon pole bottom ferrule adapter sold separately above.

Big Advantage: If it gets banged up, just get a can of gold spray paint and make it look like new. Terrific feature for a stand that will be in a high activity situation such as a high school band room, high school auditorium or busy public lobby.

 No more need for sand filled bases that can crack with rough handling and make a mess. 12" Diameter, 17 lbs

 

Regent Floor Stand #FS5G GOLD $73.00

Regent Floor Stand #FS5S SILVER $74.00

Are you willing to use a sand filled floor stand and need a bright mirror finish? Then this is your stand

This floor stand is supplied empty: You fill it with sand

Includes insert sleeves to accept a 1", 11/8" and 11/4" pole but it will accept the pointed end of our guidon pole staff if you use the guidon pole bottom ferrule adapter sold above

Guidon Staffs are Also available with brass plated hardware: brass army spear, brass bottom ferrule

 

Guidon pole sets with BRASS plated hardware

Model Approx length tip to tip when assembled Diameter # Sections Price
GPS7G 8' 1 1/4" 2 $249.00
GPS8G 9' 1 1/4" 2 $265.00
GPS9G 10' 1 1/4" 2 $281.00

Due to UPS oversize carton requirements, add $22.00 per order, not $22.00 per pole, for orders that include any of these aluminum poles.

The url for this page is http://flagguys.com/guidonstaff.html