Page Title: Beaded Retainer Rings Other Flagpole Parts Internal Flagpole Trucks and Parts
Mega Flagpole Retainer Rings
Why you should buy my Mega Ring Flagpole Beaded Retainer Rings instead of any others
All flagpole retaining rings are not the same; Just look at the comparison photos!
Unlike others, I supply my retainer rings made with 3/16" cable, not 1/8" cable
  The retainer ring is supplied based on the diameter of the flagpole at the base which is the butt diameter. We show the diameter of the pole, NOT the diameter of the ring. |
Retainer flagpole rings are generally used with internal halyard flagpoles by
providing a means of keeping the bottom of the flag close to the pole and as an
aid to raise and lower the flag. Retainer rings can also be used on large
multi-grommet flags on both external and internal halyard flagpoles as a means
to keep the flags close to the pole and reduce the strain on the upper and lower
grommets of the flag. These beaded retainer rings are constructed of either 1"
or combination of 1" and 2" diameter nylon balls strung onto 3/16" stainless
steel aircraft cable with a stainless steel thimble attached to each end with
two copper crimps. Complete with stainless steel quick link. Standard stock
colors
are White, Silver, and Bronze. Please specify color when ordering. |
|||||||||||||||||||||||||||||||||||
 Left: Common flagpole retainer ring as used throughout the industry Right: Your new Mega Ring; Which one would you rather have?
|
Your retainer ring is under a great deal of stress. If it fails, your flag flies away from the pole and you have a problem. The standard retainer ring used throughout the industry is shown on the left. It has 1/8" cable and small crimps. My Mega Ring is on the right. It has 3/16" cable and big crimps.
|
|||||||||||||||||||||||||||||||||||
 Top: Your new Mega Ring Bottom: Common flagpole retainer ring as used throughout the industry
|
 Left: Retainer ring from everyone else Right: Your new Mega Ring
|
|||||||||||||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||||||||||||
| For Pole Butt Diameter | Overall Length, Approx | #of 1" balls | White |
Black |
Silver (Not Pictured) |
 Bronze |
||||||||||||||||||||||||||||||
| 5" | 30" | 24 | #RR5W $133.00 | #RR5B $144.00 | #RR5S $144.50 | #RR5B2 $144.95 | ||||||||||||||||||||||||||||||
| 6" | 34" | 28 | #RR6W $136.00
|
#RR6B $147.00 | #RR6S $147.50 | #RR6B2 $147.95 | ||||||||||||||||||||||||||||||
| 7" | 38" | 32 | #RR7W $142.00
|
#RR7B $153.00 | #RR7S $153.50 | #RR7B2 $153.95 | ||||||||||||||||||||||||||||||
| 8" | 41" | 36 | #RR8W $144.00
|
#RR8B $155.00 | #RR8S $155.50 | #RR8B2 $155.95 | ||||||||||||||||||||||||||||||
| 10" | 49" | 44 | #RR10W $154.00 | #RR10B $165.00 | #RR10S $165.50 | #RR10B2 $154.95 | ||||||||||||||||||||||||||||||
| 11" | 52" | 48 | #RR11W $161.00
|
#RR11B $172.00 | #RR11S $172.50 | #RR11B2 $172.95 | ||||||||||||||||||||||||||||||
| 12" | 56" | 52 | #RR12W $164.00
|
#RR12B $175.00 | #RR12S $175.50 | #RR12B2 $175.95 | ||||||||||||||||||||||||||||||
|
|
Nylon Retainer Ring Balls ONLY: Drilled to be strung onto 1/8" or 3/16" stainless steel aircraft cable
|
|||||||||||||||||||||||||||||||||||
| For Pole Butt Diameter | #of 1" balls | #of 2" balls |
Overall Length, Approx |
White | The ring is supplied based on the diameter of the flagpole at the base which is the butt diameter. We show the diameter of the pole, NOT the diameter of the ring | |||||||||||||||||||||||||||||||
| 13" | 34 | 8 |
62"
|
#RR13W $223.00 | For 13" pole diameter and greater, the retainer rings come in white only | |||||||||||||||||||||||||||||||
| 14" | 36 | 9 | 66"
|
#RR14W $239.00 | ||||||||||||||||||||||||||||||||
| 16" | 40 | 11 | 74"
|
#RR16W $259.00 | ||||||||||||||||||||||||||||||||
| 18" | 44 | 13 | 82"
|
#RR18W $289.00 | ||||||||||||||||||||||||||||||||
| 20" | 48 | 15 | 90"
|
#RR20W $299.00 | ||||||||||||||||||||||||||||||||
| 22" | 52 | 17 | 98"
|
#RR22W $319.00 | ||||||||||||||||||||||||||||||||
| 24" | 56 | 19 | 106"
|
#RR24W $381.00 | ||||||||||||||||||||||||||||||||
| 30" | 68 | 25 | 124"
|
#RR30W $425.00 | ||||||||||||||||||||||||||||||||
| 32" | 72 | 27 | 132"
|
#RR32W $435.00 | ||||||||||||||||||||||||||||||||
| 34" | 76 | 29 | 140"
|
#RR34W $490.00 | ||||||||||||||||||||||||||||||||
| 36" | 80 | 31 | 148"
|
#RR36W $510.00 | ||||||||||||||||||||||||||||||||
|
Stainless Steel Quick Link
|
 |
|||||||||||||||||||||||||||||||||||
|
The url for this page is http://flagguys.com/retainerrings.html |
||||||||||||||||||||||||||||||||||||
RR13 Through
RR36 is configured like this: Made with a combination of 1" and 2" balls
